Three steps in the color management of ECO Solvent Printer design proofing
The printer has a software called "RIP," which is color management software.
The main role is to convert the image color processing into inkjet print data, with the device to print on different materials. For color management, here's a detailed introduction:
Due to the different ways of processing colors between different devices (scanners, monitors, printers, and printers), the color space of each device is different, so the phenomenon of color mismatch is inevitable. For any device, there must be some color outside its color gamut.
Ideally, color should maintain color stability and predictability throughout the design and printing process. However, this requirement for color cannot be achieved naturally, and the color management system (CMS) can overcome this problem to help people achieve the desired color stability and predictability.
CMS manages the gamut space of different devices in the workflow, converts scanned RGB color data to CMYK data, and also converts CMYK data to CMYK values for different output devices for color proofing or actual printing.
The basis of color management is to ensure that all devices are in the color reproduction system. To achieve the goal of color management, we must go through three color management steps: device calibration, characterization calibration, and color gamut conversion.
Some people think that the term "equipment calibration" refers to all the steps to get accurate color, perhaps meaning that the copied color is calibrated to match the original color. However, in fact, calibration equipment is only one of the three steps of color management. The calibration itself does not guarantee the matching of colors. It only calibrates the performance of the equipment itself and only guarantees the equipment (eg scanners, monitors, printers). Reaching its prescribed index provides a way to ensure that it will work stably for a period of time.
It is a way to measure and quantify the color space, color gamut, and color characteristics of a particular device under known circumstances.
It is used to determine how to acquire color or record color when an input device or an output device is calibrated.
Characterization calibration is the process of actually creating your device description file for scanners, monitors, printers, and more.
To implement characterization calibration requires the device itself to be equipped with a high-performance color sensor.
There is color management software that works with it to implement true characterization calibration;
Otherwise, these devices must be calibrated with color management software using a separate calibration device (such as a color tone meter) to achieve characterization.
Color gamut conversion (color transfer):
This is the process of converting the color of an image from the color space data of one device to the color space data of another device. Through color management software (commonly known as RTP software), color gamut conversion can be achieved manually or automatically. Switch between gamuts on different devices, often referred to as gamut mapping.
More exciting information please pay attention: http://www.suicide-squirrels.com
More exciting advice please pay attention to YILIJET | XENONS facebook home page: Xenons
Factory Address: Building 6, Optics Valley Electronic Industrial Park, Liufang Road, Liuhuyuan New Technology Development Zone, Wuhan
Official order email: firstname.lastname@example.org
Technical support email: email@example.com
Subscribe free newsletter to get latest products and discount information.
Xenons is the world class digital inkjet printer manufacturer and total solutions supplier. As one of the largest printing engine supplier, Xenons offers the unique system plus customized digital inkjet solutions.Powered by EPSON, RICOH, TOSHIBA, SEIKO,KONICA MINOLTA, FUJIFILM DIMATIX, KYOCERA.